Label dispensers feed labels so that they can be easily handled and attached to products. Texpak carries a full line of both manual and automatic dispensers.

Manual Dispensers

These dispensers are mounted either horizontally or vertically. The operator pulls the liner forward so that the label partially releases from the liner. This makes it easy to pick the label off the liner and apply it to the product or package.

Texpak offers a FREE dispenser with the purchase of 100M labels. Sizes may be combined to reach quantity. Handles rolls of up to 4" in diameter and
1 1/4" wide. Perfect for dispensing "inspected by", "size", and "defect" stickers. Velcro tape on bottom secures dispenser to work area.

The MDL dispensers handles rolls up to 7" in diameter on either a 1" or 3" core. Machines are available in the following widths:

MDL25             3 " wide
MDL45        4 1/2" wide
MDL65        6 1/2" wide
                    MDL85        8 1/2" wide
                    MDL125     12 1/2" wide

Electric Dispenser

Electrical label dispensers automatically feed a label into position when the prior label has been removed. These types of dispensers vary in terms of the width of labels they can handle and how the presence of a label is sensed. There are three type of label sensors: mechanical, photo and optical. Mechanical sensors stop the movement of the labels when the label touches the sensor. Photo sensors are good for opaque labels as they sense the difference in color between the label and the backing. Optical sensors are the most sensitive and accurate and can detect transparent, miniature, metallic and opaque labels. Texpak offers many other dispensers in addition to the ones shown below.

Mechanical sensor. As the label is removed the machine automatically peels, releases and advances the following label. Will dispense most standard labels without difficulty. The U-45 unit accepts labels up to 4 1/2" wide while the U-60 accepts labels up to 6" wide. See the U-45 operation by clicking www.texpak.com/u45 

Operates with photo-sensor reliability so there is no hair trigger to adjust. These units have the ability to dispense all types of die-cut and butt-cut labels. Equally important, no tolls are required for label changeovers or size adjustments and no operator training is required. The KL-100 handles labels up to 4 1/2" wide with a maximum roll diameter of 9" while the KL-150 is for labels from 3/8' wide to 6" wide and 5/8" long to 8" long and also takes a maximum roll diameter of 9".

Top of the line dispenser with optical sensor. The SH404TR peels, releases and advances all types of butt-cut and die-cut labels either opaque or transparent. Accepts either rolled or fan-folded labels.  It doesn't matter if the labels are large, small, opaque, transparent, irregularly shaped or round. The SH404 can feed them all. Like the KL series, no adjustments are required for label changeover. The SH404TR is designed for regular size labels and can handle a label as small as 3/8" x 5/8" up to a 6" x 8" label. The maximum roll diameter is 6". The SH402 is for miniature die-cut and butt-cut labels and label sixes can range form 13/64 x 25/64 up to 2" x 5". The maximum roll diameter is also 6".